Compared to a sit-down unit, the stand-up lift truck unit is totally different to operate. The method at which you lift loads and your movements are completely different. If you do not have proper training for operating a stand-up model, you could potentially cause harm co-workers or to yourself. When operating a stand-up model, you must follow the proper safety regulations. There are some basic operating standards that should be met when utilizing a stand-up model.
When beginning, stand up on the forklift in order to get a feel for the controls and the steering knob. The steering is handled with the knob steering plate instead of a steering wheel. Take note that this particular knob moves very fast, therefore, you must be accustomed to moving it gently in order to be sure not to over steer. The horn is located on the control handle, as is the control for the movement of the forks and for backwards, forwards. The floor pedal allows the machine to move.
If you are set to begin, turn the key to start the machine. Be sure that your forks are retracted. When you are moving around the floor, the forks should be pointed slightly upwards. Do not drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn in order to alert those around you. Look behind you prior to stepping on the pedal so as to make sure the path is safe and clear. After that, pull the control handle towards you while stepping on the pedal. Stay alert and focused and make sure that you are operating in a safe way at all times.
When approaching a corner with the lift truck, turn the steering knob in the direction you are heading. Make sure to keep your hands on the control handle and keep your foot on the accelerator. When turning right, the steering knob would move in a clockwise direction while moving forward. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have only utilized sit down models, the stand-up versions could take some getting used to. If you take some time to figure out the machinery and with some training, you could handle loads efficiently and quickly in little time.